## Re-Recording Individual Channels Requires at least firmware 1.1.0.

You can re-record the animation for individual outputs (channels) by following the standard recording guide but holding down the input selection channel:

• Ensure the write-lock switch is in the 'unlocked' position

• Press the record button
  • The recordable trigger tracks will start flashing green

• Press and hold a number button to select the trigger track you'd like to record until all four buttons start flashing green rapidly.

• Press the number button(s) of the channels that you'd like to re-record. If you're re-recording multiple channels then all desired buttons must be pressed / held at the same time. As soon as all buttons are released those channels will begin recording, and the unselected channels will playback their original animation.

• Press the number buttons to record your animation in real-time. Only the channels that you selected previously will respond to input and record. The other channels will playback their original animation/

• Press the record button again to finish the recording process.
  • If you'd like to include a cool-down / lock-out period after animation playback, simply wait a length of time before pressing the record button again to stop recording.

• Press one of the trigger number buttons on the sending controller to start playback and test your animation. Or trigger it through one of the trigger inputs.

• (optional) Slide the write-lock switch to the 'locked' position to prevent accidentally overwriting your animation.